Description
Achieve a polished appearance when turning corners along the face of your bar while providing adequate support for your industrial black pipe bar foot rail with the use of our 90° side outlet elbow fitting. This fitting enables the connection of two pieces of 2″ ID (2 3/8″ OD) black pipe foot rail at a 90° angle, while being reinforced by our 4″ long bar rail tubing connector, which is securely fastened to your floor using a black pipe flange.
To use, simply insert a threaded end of black pipe into either end of the fitting and tighten to your desired level of firmness. The connector piece can be screwed in all the way to the fitting or left with some threading exposed, depending on your desired height for the bar foot rail tubing. This setup will provide a sturdy bar foot rest that sits anywhere from 4″-7″ off the ground.
The black pipe bar foot rail is a popular choice for adding an industrial touch to modern bars and restaurants. Ensure a proper installation by utilizing bar foot rail brackets that complement its aesthetic.
Aubrey Elsey –
Nice post. I used to be checking constantly this weblog and I’m inspired! Extremely useful information particularly the last section 🙂 I deal with such information much. I was looking for this particular info for a long time. Thanks and good luck.
http://www.tlovertonet.com/
nazwiska hiszpańskie –
Thanks for the post, can you make it so I get an email when there is a new post?
https://nazwiska.net/hiszpania
tlovertonet –
Great write-up, I?¦m regular visitor of one?¦s blog, maintain up the excellent operate, and It is going to be a regular visitor for a long time.
http://www.tlovertonet.com/